{"product_id":"eventuri-carbon-intake-system-mercedes-a35-amg-a250","title":"Eventuri Carbon Intake System - Mercedes A35 AMG | A250","description":"\u003cp data-open-accessibility-text-original=\"16px\"\u003e(some pictures show optional Turbo Tube)\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong\u003ePerformance Increase : 15-20hp, 15-18ft-lb\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\"\u003eThe Mercedes A35 AMG Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Reducing heat soak and increasing internal volume are the main considerations when designing an intake for turbocharged engines. In the A35, the intake system is in close proximity to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental to engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IATs are kept to a minimum is for a fully sealed intake. In order to reduce the restriction from a sealed intake, we have increased the volume of the airbox by relocating the ECU and also allowing an opening in the airbox on the cold side which is away from the direct heat of the manifold. The carbon inlet tube is larger in internal volume with a starting internal diameter of 111mm (4.4″) smoothly tapering down to match the turbo inlet pipe. Finally, we use a custom-made high-flow dry filter which is ISO tested for filtration performance and has a larger filtration area than the stock filter.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong\u003eDyno Testing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\"\u003eDyno testing was carried out by MSL Performance who are a Mercedes specialist based in the UK. A fully standard A35 AMG was tested with the stock airbox and then with the Eventuri intake back to back whilst ensuring external conditions were the same. As can be seen below the intake provides a gain in performance throughout the RPM range. The highlighted point shows a significant gain of power where the intake allows a higher flow rate to be maintained in the higher RPM range where the stock airbox starts to become a restriction. The resulting gains are noticeable on the road with better throttle response and improved acceleration times. With a tuned A35 we would expect even better gains as the demand from the turbo increases.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong\u003eThe Eventuri Difference\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\"\u003eThe AMG A35 Eventuri system uses our Patented Carbon Fibre Housings with our Gen 2 bespoke filter, which provides an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield but a unique design that invokes the Venturi effect and maintains laminar flow conditions to reduce the drag on the turbo. You can read more about the housing design and how it works\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/www.eventuri.net\/technology\/\" class=\"navigable\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp data-open-accessibility-text-original=\"16px\"\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-open-accessibility-text-original=\"16px\"\u003eFitment: Mercedes A35 AMG, CLA35 AMG, A250, CLA250, GLB35 AMG\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\"\u003e\n\u003cspan\u003eEach intake system consists of:\u003c\/span\u003e\n\u003cul\u003e\n\u003cli data-open-accessibility-text-original=\"16px\"\u003eCarbon Fiber Airbox\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\"\u003eBespoke High Flow Dry Cone Filter\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\"\u003eCarbon Fiber Inlet Tube\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\"\u003eCNC Machined Inlet Flange\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\"\u003eLaser Cut Stainless Steel Brackets and ECU Cover\u003c\/li\u003e\n\u003cli data-open-accessibility-text-original=\"16px\"\u003eSilicon Coupler with OEM Specification Clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Autotecknic","offers":[{"title":"No","offer_id":47671297671422,"sku":"EVE-A35-CF-INT-1","price":1395.0,"currency_code":"USD","in_stock":true},{"title":"Yes - Include Turbo Tube (EVE-A35-CF-CHG)","offer_id":47671297704190,"sku":"EVE-A35-CF-INT-2","price":2240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0564\/4225\/7564\/files\/Eve-A35-1_1024x1024_8d2de5fc-1df4-47fc-9e99-6ee72d3e4192.jpg?v=1767412287","url":"https:\/\/zeferperformance.com\/products\/eventuri-carbon-intake-system-mercedes-a35-amg-a250","provider":"Zefer Performance","version":"1.0","type":"link"}